The reverse variant of the above, again conforming to DIN 41612, IEC 603-2 and BS 9525, this connector variant being produced inform R only.

Providing a very high contact density- up to 96 contacts in three rows, this range of connectors conform to the requirements of DIN 41612, IEC 603-2 and BS 9525. The connector is available in both standard types B, C and half Euro configurations, as well as a combination or mixed layout variant (Form M).

Available in a standard range of dual row 2.54mm pitch contact configurations from 10 to 64 ways. The connector is available in both vertical and right angle pcb mounting versions.

Available in a standard range of dual row 2.54mm pitch contact configurations from 10 to 64 ways. The connector has been designed for rapid IDC termination onto the industry standard 38 AWG stranded conductor 'ribbon' cable.

More of a process than a connector range! By the use of newly developed resins we are able to hermetically seal connectors for use in both high pressure and vacuum applications up to10-7 m.bar. The process is not limited solely to those connector ranges usually associated with hermetic sealing, but can be applied to 99% of connector series. The new process offers a higher levels of sealing, greater flexibility, a more rugged component and a reduction in both overall cost and lead time against the more conventional glass to metal or ceramic technology.

Especially designed for applications where space and weight limitations is of critical importance, this microminature range of connectors meet the performance specifications of MIL-C-83513 and are available in a range of interface configurations and styles. This range of connectors has proven usage in aerospace applications and it's diminutive size make it suitable for nano-technology applications including medical systems.

This range of micro-miniature multiway connectors are designed to meet the performance requirements of MIL-STD-1344, for use in such applications as space, airborne defence systems, avionics and test systems. Available with either metal or plastic bodied versions in 8 standard interface configurations, to a maximum of 100 ways. All styles are available in plug or socket format with either direct wire crimp or solder bucket wire termination and straight right angle through board contacts.

Supplied in the standard styles and contact block configurations fitted with the 13.3mm long. 0.6mm square pin to terminate with 3 wraps. Alternative pin lengths are available on request.

Again available in the same styles and contact configurations, the right angle variants are also available in either European or US

Available in the same contact configurations and plating variants as the solder bucket termination style, the range of D connectors for straight PCB mounting can also be supplied with pre-tinned contacts.